• For 3/8″ (10 mm) Glass
  • Stainless Steel
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
  • Custom Painted Finishes Available Upon Request

Regular Price: From: £19.16

SKU: PARZ510 Category:

Description

Round Type Flat Glass Clamps are designed to be used on glass thickness of 1/4″ up to 1/2″ (6 to 12 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

Additional information

Glass Thickness

10 mm

Finish

,

Technical Data

For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece.

NOTE: 1/2″ (12 mm) notch is required if using the steel pin (included with the clamp) for additional glass support. Replacement gaskets are available

SPECIFICATIONS:
Glass Thicknesses: Models for 1/4″ to 1/2″ (6 to 12 mm)
Base Design: Radius
For Use With: Square Tubing or Flat Surfaces
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication: For 1/4″ (6 mm), 5/16″ (8 mm), and 3/8″ (10 mm) Thick Glass: 1/2″ (12 mm) notch is required if using provided steel pin for glass support. For 1/2″ (12 mm) Thick Glass: 9/16″ (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet

Delivery Information

This item can be delivered to all addresses within the UK and Northern Ireland (unless otherwise stated) as well as Channel Islands, Isle of Man, Isles of Scilly, Orkney, Shetland and Western Scottish Islands. We may be able to deliver to the Republic of Ireland or other selected EU countries.